/My Home Lab Server with 20 Cores / 40 Threads and 128 GB Memory

My Home Lab Server with 20 Cores / 40 Threads and 128 GB Memory

dl380gen8

I’ve bought a secondhand HP DL380p Gen8 server and I think it’s awesome.

This machine has dual-processors, with each CPU having 10 physical cores and two threads per core, for a grand total of 20 cores / 40 threads for the entire machine. It’s also equiped with 128 GB or memory.

htop

Laughs in htop

I bought this machine because I wanted to have a dedicated server on which I run my home lab environment. This is the box on which I will try out new software, run experiments, test ideas and so on.

In this article I’d like to share some information about this machine and my experiences with it. Let’s start with an overview of the specifications.

HP DL380p Gen8 Specifications

Part Description
Form factor 19″ 2U rackmount
Processor 2 x Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz
RAM 128 GB DDR3 (16 x 8GB)
Onboard LAN 4 x Broadcom 1 Gigabit (Copper)
RAID Controller HP P420i
Storage 8 x 2.5″ SAS/SATA slots (no media)
PSU 1 x 750 Watt
Power usage about  96 Watt idle
KVM HP iLO 4 with HTML5 console

Cost

I’ve bought this server for around 1500 Euro ($1700) including taxes (21%) and a one year warranty. I’ve bought it from the company https://creoserver.com (The Netherlands).

I believe that the price/performance balance for this server is quite good, but I let you be the judge of that.

The storage is based on some SSDs I already owned and some new SSDs I’ve bought separately. So the price is based on the chassis + storage caddies but without actual storage media.

Age

The HP DL380p Gen8 product generation was introduced in 2012.
The configuration I have chosen is based on a CPU that was introduced in 2013. Based on the serial number I guess the chassis+motherboard is from 2014 (about 5 years old at the time I bought it).

CPU – The Intel Xeon E5-2680 v2

The Intel Xeon E5-2680 v2 CPU originated from late 2013 and is based on the ivy bridge architecture. The base clock is 2.8 Ghz but it can turbo boost up to 3.6 Ghz. With 10C/20T per CPU and the dual-processor configuration it’s needless to say that you can run quite a few virtual machines and/or containers in parallel on this machine, without even oversubscribing CPU cores.

You may ask what kind of performance you may expect from this box and how 2013 holds up in 2019. A high number of cores is nice, but the cores themselves fast enough?

The 2680v2 is a processor that sold for about $1700 (Intel Ark) when it came out in 2013. If you look at the list of Xeon processors from that timeframe, it was the top of the line Intel dual-processor compatible CPU with only the E5-2690 v2 processor above it, which ran only 200 Mhz faster (base clock).

There was almost nothing better at that time and people ran their companies on those machines so I think performance is more than enough. Especially for a lab environment (overkill is probably an understatement).

I’ve included some benchmark results below just for reference. You can use this information to make some comparisons to other CPUs that you are familiar with to get some sense of the performance.

I’ve also compared scores a little bit and I’ve noticed that people in the past were perfectly happy gaming on desktop systems with CPUs that have equal or less single core performance.

Geekbench 4 score

I’ve run Geekbench on the DL380p Gen8:

Single Core:  3199
Multi Core : 46959

Passmark

(lookup from this table)

Single Core:  1824
Multi Core : 15885

Other benchmarks

I won’t promise anything, but if it’s not too much work I can run a benchmark if you have any suggestions. Feel free to comment down below or email me.

Memory

I’ve ordered this machine with 128GB of DDR3 memory. The memory consists of 16 x 8GB 1333Mhz memory modules. The machine has 12 memory slots per CPU so there are still 8 slots left to be filled if I ever feel a need to expand memory.

Storage

Drive slots

I’ve chosen a chassis with room for 8 x 2.5″ drives. Depending on the chassis model, you can go up to 25 x 2.5″ (Small Form Factor) or 12 x 3.5″ (Large Form Factor).

Both SAS and SATA HDDs/SSDs are supported. You can’t just stick HDDs or SSDs in the drive slots, you need to put your HDD/SSD first in an empty caddy, I bought those with the server.

caddy

The caddy has the LED lights build-in to signal the drive status. It has some electrical contacts at the back for those lights, it’s not just a plastic ‘sabot’.

My caddies tended to be a bit fragile, they came apart when trying to pull a drive out of the cage, but nothing broke and it all works fine.

Drive compatibility

HP servers can be picky about which HDD disk drives work or won’t work. They all technically work, but sometimes the disk temperature cannot be read by the controller. In that case, the system fans will slowly start to spin faster and faster until almost maximum speed. This is obviously not workable.

Smaller HDD drives did work fine and the server stayed quiet. Only some 500GB HDD drives caused ‘thermal runaway’.

I’ve found this table of supported and unsupported drives for HP controllers.

Overview of SSDs that are compatible

I’ve tested these SSDs:

- Samsung 860 Pro (consumer)
- Samsung PM833   (enterprise)
- Intel D3-S4610  (enterprise)
- Crucial MX200   (consumer)

P420i RAID mode vs. HBA mode

Important: you can’t boot from the storage controller in HBA mode. You are left with booting from internal/external USB (2.0) or internal SD card.

I’m not sure if there is any significant performance difference between the two modes for SSDs. I just want to be able to boot from one of the drives, not from USB/SD card.

Storage management – ssacli tool

To configure the P420i RAID controller, It’s highly recommended to install the ssacli tool from HP. Otherwise you have to reboot and wait 10 minutes (no joke) to enter the ‘Smart Array Configuration Utility’ to make changes to the storage configuration.

I just followed these instructions to install this tool on Ubuntu:

curl http://downloads.linux.hpe.com/SDR/hpPublicKey1024.pub | apt-key add -
curl http://downloads.linux.hpe.com/SDR/hpPublicKey2048.pub | apt-key add -
curl http://downloads.linux.hpe.com/SDR/hpPublicKey2048_key1.pub | apt-key add -
curl http://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -

Contents of /etc/apt/sources.list.d/hp.list:

deb http://downloads.linux.hpe.com/SDR/repo/mcp/Ubuntu bionic/current non-free

Installing the software:

apt-get update
apt-get install ssacli

Some examples:

ssacli ctrl all show detail
ssacli ctrl slot=0 array all show detail
ssacli ctrl slot=0 ld all show detail
ssacli ctrl slot=0 pd all show detail

ssacli ctrl slot=0 ld 7 delete
ssacli ctrl slot=0 create type=ld raid=0 drives=2I:2:7 ss=8 ssdopo=off

ssacli ctrl slot=0 array i modify ssdsmartpath=disable
ssacli ctrl slot=0 pd 1 modify led=on

RAID vs non-RAID

You are forced by the RAID controller to always create a RAID array, even if you don’t need the redundancy or performance.

I’ve chosen to just put SSDs in individual RAID0 logical drives, making them effectively individual drives from the perspective of the operating system. I’m not running a mission-critical application so this is fine for me.

frontside

A small downside is that the bright red square light on each drive will permanently glow up. That light signals truthfully that you cannot remove a drive without killing the ‘array’. I’ve not seen any option to turn this off, which I can understand.

Sound / Noise level

Idle sound level

I’ve taken some sound measurements using my iPhone with an app, so how reliable this is, I don’t know but it’s something.

During boot time (full fan speed)  : 62 dB
Idle, booted into operating system : 50 dB

To set some expectations:

My very subjective opinion is that at 50 dB the sound level is reasonable for a server like this, but it’s definitely not quiet. I would not be able to work, relax or sleep with this server in the same room.

Although this server is fairly quiet at idle, it does need it’s own dedicated room. When the door is closed, you won’t hear it at idle, but under sustained load, you will hear high pitched fan noise even with a closed door.

Impact of adding a PCIe card on noise level

When you put any kind of PCIe card in the server, two of it’s six fans in-line with the PCIe expansion slot will run at 40%+ to cool these cards.

The sound level will become a bit annoying. I’ve not found any option to disable this behavior. This means that if you need to expand the server with additional network ports or other components, the server really needs a room with a closed door.

Please note that if you want to keep noise levels down but want to upgrade to 10Gbit networking, you could opt to configure the server with Flexlom 2 x 10Gbit instead of the stock Flexlom 4 x 1 Gbit copper. This will give you more bandwidth without the need to add a PCIe card.

At this time, I have no need to add any high-speed networking as I can run the simulations all on the machine itself (at least that’s the plan).

Idle power usage

The server reports around 98 Watt of power usage with the static high performance power setting. This value is obtained through the iLO interface.

The server supports (obviously) dual power supplies but that option only adds cost, increases power usage and gains me nothing. I’m not running a mission-critical business with this server.

By default, this server is turned off. When I want to do some work, I turn the server on using wake-on-lan. I do this with all my equipment except for my router/firewall.

Boot up time

I clocked 4 minutes and 28 seconds until I got a ping reply from the operating system.

KVM / iLO (Remote Management)

As with almost all HP servers, this machine has a dedicated remote management port + engine (iLO) so you can do everything remotely, such as powering the server on/off. You also have access to a virtual console (KVM over IP) and virtual CD-ROM drive to remotely provision the server.

backside

For those of you who are less familiar with this hardware: notice the network interface left of the VGA connector. This is the iLO remote management interface. It’s a mini computer with it’s own operatingsystem and IP-address, thus reachable from the network.

In the past iLO or similar solutions were a pain to use because you need Java or .NET to use the virtual console. With the ilO 2.7 update you will have a HTML5 interace, doing away with the need for both Java as .NET. This is a huge usability improvement.

Operating system

I’m currently running Ubuntu Linux 18.04 and using plain vanilla KVM to spawn virtual machines, wich works fine. Everything is maintained/configured with Ansible.

Closing words

I hope this overview was informative. Maybe it could be an option for yourself to consider if you ever want to setup a home lab yourself.